RTV SILICONE GASKET MAKER;CAR CARE PRODUCTS;ADHESIVES AND SEALANTS

Product Description:
Copper Spray is a fast drying aerosol product that contains copper to help dissipate heat to prevent gasket burnout and improves heat transfer. Remains tacky to allow gasket re-position. Fills surface imperfections.
Application:
Automobile Suggested application
Cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Motorcycle Suggested application
Cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications. Specifically recommended for filling hot spots and surface imperfections.
Directions:
1. Provide adequate ventilation.
2. Surfaces should be free of oil, dirt and grease.
3. Mask areas that should not be coated.
4. Shake can with ball agitator for one minute. For best results, aerosol can should be at room temperature before spraying.
5.Holding can 8 to 10 inches from the surface to be coated, press the nozzle and discharge the product uniformly. Apply to both sides of gasket. Avoid over spray. DO NOT SPRAY into engine compartment. Allow solvent to evaporate before assembly.
For Cleanup:
1. Turn can upside-down and spray to clear nozzle.
2. Clean hands with hand cleaners.
Note: Aerosol product will coat 10 to 12 standard gaskets.
Storage:
Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8℃ to 28℃ (46F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
KEEP OUT OF REACH OF CHILDREN.