RTV SILICONE GASKET MAKER;CAR CARE PRODUCTS;ADHESIVES AND SEALANTS

It forms to any size or shape gasket, and is resistant to both temperature and migration caused by thermal cycling. Can withstand temperature from-80°F up to 600°F (315°C).Ideal for timing covers, intake manifolds, exhaust manifolds, cylinder heads, carburetors, and more. Dries securely as a gasket.
DIRECTIONS:
1. Surfaces must be clean, dry, and free of oil and grease.
2. Pierce seal at the end of the metal tube using the top of the cap.
3. Screw on applicator nozzle and cut to desired bead size.
4. Apply an even bead of silicone around perimeter of surface.
5. Assemble parts once silicone has skinned. Skinning should take about 8-12 minutes.
6. Remove any excess silicone.
7. The silicone will dry in 1 hour and cure completely in 18-24 hours.
WARNING:
Uncured sealant causes eyes and skin irritation. In case of eye contact, flush with water and call your physician immediately.
KEEP OUT OF REACH OF CHILDREN.