Guangdong Sequre Technology Co., Ltd.

First, product introduction.
Now electronic products, charging treasure, electric vehicles, balanced cars, aircraft models, ship models, power tools and other widely used in lithium batteries. Traditional welding machines lack flexibility due to the diversity of battery shapes and the limitations of the way they are supplied. The SQ-SW1 is battery-powered and has a high and low voltage warning, OLED display. Intelligently switch automatic manual operating modes to meet different needs and operate flexible and efficient welding tools with new spot welding technology.

Second, technical parameters.
1, input voltage: 10-14V.
2, welding thickness: 0.1-0.3mm.
3, trigger delay: 0.5-5s.
4, screen flip: 180 degrees.
5, pulse time: 1-100ms (default), 1-500ms (set)
6, short pulse punch: 0-100%
7, operating mode: automatic /manual.
8, voltage warning: low voltage, high voltage.
9, power supply interface: XT90.
10, recommended batteries: lithium battery (3S 5000mAh minimum 60C) automotive battery (12V 400-800CCA)

Third, safety tips.
1, two electrodes, welding needles can not be touched together to avoid short circuit.
2, pay attention to the correct wiring, specific wiring method reference manual.
3, the first use, the weld pulse duration is set to 2ms, and view the welding results. According to the actual welding situation, gradually set the appropriate welding pulse duration to obtain good welding.
4. If you use higher currents or non-factory parts, you do so at your own risk.

Fourth, package description.
Package one.
1 × host.
1× welding pen.
1× nickel belt.
1 × pedal.
2× welding needle.
2× battery holder.

Package two.
1 × host.
1×-in-one welding pen.
1× nickel belt.
2× welding needle.
2× battery holder.