TOKAR GMBH

Polypropylene, referred to as PP, is a polymer made of propylene by addition polymerization. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89 ~ 0.91g/cm3, flammable, the melting point is 164~170ºC, it is softened at about 155ºC, and the use temperature range is -30 ~ 140ºC. It can resist the corrosion of acid, alkali, salt solution and a variety of organic solvents below 80ºC, and can decompose under high temperature and oxidation. Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic lightweight general purpose plastic with chemical resistance, heat resistance, electrical insulation, high strength mechanical properties and good high wear resistance. It is widely usedin the production of clothing, blankets and other fiber products, medical equipment, automobiles, bicycles, parts, transportation pipes, chemical containers, etc., and is also used in food and medicine packaging



Engineering Plastic nylon 66 nylon 6 granule :
Introduction Nylon 66, also known as polyamide 66, polyamide-66, polydimethylene adipic acid, adipic acid and adipic acid polycondensation by the adipic acid and adipic acid condensation. Its comprehensive performance is good, with high strength, good rigidity, impact resistance, oil and chemical Chemicalbook chemicals, wear-resistant and self-lubricating advantages, especially hardness, rigidity, heat resistance and creep performance is better, and raw materials are readily , low cost, and therefore are widely used in industry, apparel, decorative, engineering plastics and other fields.
1.Wear resistant,Thermal stability,High rigidity,Toughened,2.High impact,High sliding,High Flow,High gloss,Weather resistan etc3.For our Reinforced Nylon series, it for PA66 or PA6 with glass fiber range from 10% to 60%, for PA66 or PA6 with carbon fiber range from 10%-50%.